1 s1703 series 3.3v cmos smd crystal clock oscillator (xo) ds 272 rev a | 04/07/06 pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all specifications are subject to change without notice. not for new designs - see s1613 series product features ? 3.3v cmos compatible logic levels ? pin-compatible with standard 7x5mm packages ? designed for standard reflow and washing techniques ? pb-free and rohs/green compliant available (seam seal package only) product description the s1703 series is a 3.3v crystal clock oscillator. the output clock signal is compatible with cmos logic levels. the device, available on tape and reel, is contained in a 7x5mm surface-mount ceramic package. applications the s1703 series is an ideal reference clock for smt applications including: ? pc, notebook/palmtop computers ? portable applications ? pcmcia cards and hdd common frequencies contact saronix for additional frequencies 3.6864 mhz 8.0000 mhz 10.0000 mhz 14.3181 mhz 16.0000 mhz 18.4320 mhz 20.0000 mhz 24.5760 mhz 25.0000 mhz 32.0000 mhz 32.7680 mhz 33.0000 mhz 35.3280 mhz 40.0000 mhz 48.0000 mhz 50.0000 mhz 60.0000 mhz 66.0000 mhz 66.6667 mhz 75.0000 mhz ordering information packaging outline actual size = 7 x 5mm pin functions pin function 1 oe function 2 ground 3 clock output 4 v dd 5mm 7mm ??????????????????? ???????????????????????? ????????????????????????? ?? ?? ?? ? ????????????? ? ? ? ??????????????????? ????????????????? ?? ?? ? ? ?? ?? ???? ? ???? ? ??????? ??????? ??? ????????????????????????? ????????????????????? ?? ? ????????? ?????????????? ? ??????????????????????????????? ? ????? ???????????????? ???? ??????????????????????????????????? ? ???????? ????????????????????????????????????????????? ? ????????????????????????????????????????????????? ????????????????????????????
2 ds 272 rev a | 04/07/06 s1703 series 3.3v cmos smd crystal clock oscillator (xo) pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all specifications are subject to change without notice. not for new designs - see s1613 series electrical performance parameter min. typ. max. units notes output frequency 1.8432 80 mhz as specifed supply voltage +2.97 +3.3 +3.63 v dc supply current, output enabled 15 ma 1.8432 to 34.0 mhz 25 > 34 to 50.0 mhz 40 > 50 to 80.0 mhz supply current, standby mode 10 a output hi-z frequency stability 50 to 100 ppm see note 1 below operating temperature 0 +70 c output logic 0, vol 10% v dd v output logic 1, voh 90% v dd v output load 30 pf duty cycle 45 55 % 0 to +70c measured 50%vdd rise and fall time 1.8432 to 64.0000 mhz 10 ns measured 20/80% of waveform 64.0001 to 66.667 mhz 6 66.667 to 80.0000 mhz 5 jitter, phase 1.5 ps rms (1 - ) 10khz ~ 20mhz frequency band jitter, accumulated 5 ps rms (1 - ) 20,000 adjacent periods jitter, total 50 ps pk - pk 100,000 periods notes: 1. as specifed. stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25c), aging (1 year at 25c average effective ambient temperature), shock and vibration. output enable / disable function parameter min. typ. max. units notes input voltage (pin 1), output enable 2.2 v or open input voltage (pin 1), output disable (low power standby) 0.5 v output is hi-z internal pullup resistance 50 k output disable delay 150 ns output enable delay 10 ms
3 ds 272 rev a | 04/07/06 s1703 series 3.3v cmos smd crystal clock oscillator (xo) pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all specifications are subject to change without notice. not for new designs - see s1613 series test circuit absolute maximum ratings parameter min. typ. max. units notes storage temperature -55 +125 c power supply output enable / disable function 0.1f or 0.01f test point 1 2 3 4 30 pf (including probe and fixture capacitance) reliability test ratings this product is rated to meet the following test conditions (applies to seam-seal package only): type parameter test condition mechanical shock mil-std-883, method 2002, condition b mechanical solderability jesd22-b102-d method 2 (preconditioning e) mechanical terminal strength mil-std-883, method 2004, condition d mechanical gross leak mil-std-883, method 1014, condition c mechanical fine leak mil-std-883, method 1014, condition a2 (r 1 = 2x10 -8 atm cc/s) mechanical solvent resistance mil-std-202, method 215 environmental thermal shock mil-std-883, method 1011, condition a environmental moisture resistance mil-std-883, method 1004 environmental vibration mil-std-883, method 2007, condition a environmental resistance to soldering heat j-std-020c table 5-2 pb-free devices (2 cycles max)
4 ds 272 rev a | 04/07/06 s1703 series 3.3v cmos smd crystal clock oscillator (xo) pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all specifications are subject to change without notice. not for new designs - see s1613 series refow soldering profle output waveform v o l v o h 5 0 % 2 0 % 8 0 % t f t r d u t y c y c l e = 1 0 0 % x ( t a ) / ( t a + t b ) t a t b p e a k 2 6 0 c f o r 1 0 s e c m a x 2 6 0 t e m p e r a t u r e C c 1 t o 3 c / s e c m a x 6 0 t o 9 0 s e c t i m e 1 t o 3 c / s e c 2 1 7 4 t o 6 m i n u t e s m a x as per ipc/jedec j-std-020c
5 ds 272 rev a | 04/07/06 s1703 series 3.3v cmos smd crystal clock oscillator (xo) pericom semiconductor corporation ? 1-800-435-2336 ? http://www.pericom.com/saronix all specifications are subject to change without notice. not for new designs - see s1613 series mechanical drawings marking line 1: s3x y y wwx (saronix, model, stability, year, week, origin) marking line 2: frequency scale: none. dimensions are in mm/inches. recommended land pattern* *external high-frequency power decoupling is recommended.(see test circuit for minimum recom - mendation). to ensure optimal performance, do not route traces beneath the package. 4.2 .167 **exact location of markings may vary. note: seam seal package is depicted. legacy glass-frit package has limited availability, please inquire if needed.
|
